How space-charge behaviour at grain boundaries in electroceramic oxides is modified by two restricted equilibria.

Determining the space-charge potential at grain boundaries in oxides by various experimental methods bears the promise of providing a comprehensive, quantitative description of interfacial defect chemistry. In this study, we draw attention to the problem of unifying data measured in different temperature ranges. We focus on unifying data from elevated-temperature electrical methods, such as impedance spectroscopy and current-voltage measurements, with data from room-temperature imaging techniques, such as Scanning Probe Microscopy (SPM), Transmission Electron Microscopy (TEM), and Atom Probe Tomography (APT). By means of continuum simulations, we calculate the space-charge potential Φ0 at grain boundaries in the model electroceramic oxide acceptor-doped SrTiO3, taking into account, first, a restricted equilibrium that leads to frozen-in acceptor-dopant profiles, and subsequently, a restricted equilibrium that leads to frozen-in bulk oxygen-vacancy concentrations. Our results indicate non-trivial differences between experimental values of Φ0 obtained from electrical and from imaging methods, differences that arise from the different measurement temperatures and that are aggravated by the restricted equilibria. We also show that grain-boundary widths determined from elemental acceptor-cation profiles will not, on principle, agree with the electrical width extracted from impedance spectroscopy data.

Influence of incubation temperature and embryonic motility on the growth of members of Caiman yacare (Daudin, 1802) / Influência da temperatura de incubação e da motilidade embrionária sobre o crescimento dos membros de Caiman yacare (Daudin, 1802)

Abstract This study aimed to evaluate whether skeletal development of the Pantanal Caiman (Caiman yacare) is similarly influenced by temperature variation and controlled increases in embryo motility. All eggs were incubated at 90% humidity and 29 °C for the first 45 days. Thereafter, the incubation temperature was either maintained at 29 °C and embryos were treated with 4-aminopyridine (4-AP) on days 46, 47, 48, and 49 (Group I, 29 °C 4-AP, n = 15); maintained at 29 °C (n = 14; Group II); or at 33 °C (n = 14, Group III). Embryonic movement was measured using an Egg Buddy® digital monitor on days 30, 35, 42, 49, 56, and 60, at which point embryos were euthanized and samples were collected for analysis. No differences were observed between groups with varying incubation temperatures. In contrast, embryonic motility was greater in embryos treated with 4-AP (P < 0.001) on day 49, and this was associated with higher proportions of snout-vent and hand lengths. This study demonstrates for the first time that pharmacologically induced increases in embryo motility result in phenotypic changes to the proportion of elements during prenatal ontogeny, thereby effectively altering the adaptation of the species to specific environments.

Resumo Este estudo objetivou avaliar os efeitos da temperatura e motilidade embrionária sobre o desenvolvimento esquelético de jacaré-do-pantanal (Caiman yacare). Os ovos foram incubados com 90% de umidade e empregou-se a temperatura de 29°C por 45 dias. Após, para a incubação do Grupo I a temperatura continuou em 29°C, mas associou-se à injeção de 4-aminopiridina (29°C-4AP, n = 15) aplicada nos dias 46, 47, 48 e 49, do Grupo II permaneceu em 29°C (n = 14) e do Grupo III elevou-se para 33°C (n = 14). A movimentação foi mensurada através do monitor digital Egg Buddy® nos dias 30, 35, 42, 49, 56 e 60 dias. Aos 60 dias, os embriões foram eutanasiados e coletadas amostras embrionárias. Na análise estatística não foram observadas diferenças entre os grupos para o fator temperatura sobre a motilidade embrionária no desenvolvimento esquelético. Em contraste, a motilidade evidenciou diferença estatística no dia 49 para o Grupo I (P < 0,001) e apresentou maiores proporções de nariz e mão. Esses dados demonstraram pela primeira vez que o aumento na motilidade, induzidos farmacologicamente resultam em divergências fenotípicas na proporção de segmentos anatômicos durante a ontogenia pré-natal, podendo alterar efetivamente a adaptação dos animais em ambientes específicos.

Influence of incubation temperature and embryonic motility on the growth of members of Caiman yacare (Daudin, 1802)

Abstract This study aimed to evaluate whether skeletal development of the Pantanal Caiman (Caiman yacare) is similarly influenced by temperature variation and controlled increases in embryo motility. All eggs were incubated at 90% humidity and 29 °C for the first 45 days. Thereafter, the incubation temperature was either maintained at 29 °C and embryos were treated with 4-aminopyridine (4-AP) on days 46, 47, 48, and 49 (Group I, 29 °C 4-AP, n = 15); maintained at 29 °C (n = 14; Group II); or at 33 °C (n = 14, Group III). Embryonic movement was measured using an Egg Buddy® digital monitor on days 30, 35, 42, 49, 56, and 60, at which point embryos were euthanized and samples were collected for analysis. No differences were observed between groups with varying incubation temperatures. In contrast, embryonic motility was greater in embryos treated with 4-AP (P 0.001) on day 49, and this was associated with higher proportions of snout-vent and hand lengths. This study demonstrates for the first time that pharmacologically induced increases in embryo motility result in phenotypic changes to the proportion of elements during prenatal ontogeny, thereby effectively altering the adaptation of the species to specific environments.

Resumo Este estudo objetivou avaliar os efeitos da temperatura e motilidade embrionária sobre o desenvolvimento esquelético de jacaré-do-pantanal (Caiman yacare). Os ovos foram incubados com 90% de umidade e empregou-se a temperatura de 29°C por 45 dias. Após, para a incubação do Grupo I a temperatura continuou em 29°C, mas associou-se à injeção de 4-aminopiridina (29°C-4AP, n = 15) aplicada nos dias 46, 47, 48 e 49, do Grupo II permaneceu em 29°C (n = 14) e do Grupo III elevou-se para 33°C (n = 14). A movimentação foi mensurada através do monitor digital Egg Buddy® nos dias 30, 35, 42, 49, 56 e 60 dias. Aos 60 dias, os embriões foram eutanasiados e coletadas amostras embrionárias. Na análise estatística não foram observadas diferenças entre os grupos para o fator temperatura sobre a motilidade embrionária no desenvolvimento esquelético. Em contraste, a motilidade evidenciou diferença estatística no dia 49 para o Grupo I (P 0,001) e apresentou maiores proporções de nariz e mão. Esses dados demonstraram pela primeira vez que o aumento na motilidade, induzidos farmacologicamente resultam em divergências fenotípicas na proporção de segmentos anatômicos durante a ontogenia pré-natal, podendo alterar efetivamente a adaptação dos animais em ambientes específicos.

A Cluster Analysis of Oral and Cognitive Health Indicators: An Exploratory Study on Cholinergic Activity as the Link.

INTRODUCTION: Poor oral health has been suggested as a risk factor for cognitive decline. Yet, biologically plausible mechanisms explaining this relationship remain unknown. OBJECTIVES: We aimed (1) to identify oral and cognitive health clustering patterns among middle-aged to elderly Canadians and (2) to investigate the extent to which these patterns could be explained by bone mineral density (BMD), a proxy measure of the cholinergic neurons' activity. METHODS: This cross-sectional study used baseline data from the Comprehensive cohort of the Canadian Longitudinal Study of Aging (CLSA). Oral health was assessed by a self-report questionnaire, and 7 task-based instruments measured cognitive health. We identified oral and cognitive health clusters, our outcome variables, using latent class analysis. Two sets of multivariate logistic regression and 95% confidence intervals were used to investigate whether BMD explains the odds of membership in a certain oral and cognitive health group. The final models were adjusted for socioeconomic, health, and lifestyle factors. RESULTS: Our study sample (N = 25,444: 13,035 males, 12,409 females) was grouped into 5 and 4 clusters based on the oral health status and performance on the cognitive tasks, respectively. After adjusting for all potential covariates, increase in BMD was not associated with higher odds of membership in classes with better oral health (odds ratio [OR] = 1.58 [95% confidence interval {CI}: 0.85-2.92]) and cognitive health (OR = 1.61 [95% CI: 1-2.6]) compared with the groups with the least favorable oral and cognitive health status, respectively. CONCLUSION: Middle-aged and elderly Canadians show different oral and cognitive health profiles, based on their denture-wearing status and performance on cognitive tests. No evidence could be found to support BMD in place of cholinergic neurons' activity as the common explanatory factor behind the association between oral health and cognitive health. KNOWLEDGE TRANSFER STATEMENT: This study is probably the first of its kind to shed light on the cholinergic system as a potential pathway influencing oral and cognitive health. Our findings may support the notion that any potential association between poor oral health and cognitive health might be explained by common contributors, helping clinicians to find the common risk factors for both conditions.

Evaluation of cleaning and sterilization of liposuction cannulas after intentional contamination with human fat, Mycobacterium abscessus subspecies bolletii, and Geobacillusstearothermophilus.

BACKGROUND: The complex design of cannulas is a major challenge for reprocessing due to the retention and accumulation of fat residues. AIM: To evaluate the cleaning of liposuction cannulas and the protective effects of the remaining fat residues on Mycobacterium abscessus subspecies bolletii (MASB) and Geobacillus stearothermophilus inactivation during steam sterilization. METHODS: In phase 1, six standard operating procedures were evaluated for cleaning of liposuction cannulas. In phase 2, the sectioned lumens of the liposuction cannulas were contaminated with the largest and smallest volume of human fat found in phase 1, with the addition of MASB. In phase 3, the same volumes of human fat from phase 2 were used to contaminate paper strips containing G. stearothermophilus. FINDINGS: In phase 1 the residual amount of fat ranged from 6 to 52 mg. In phases 2 and 3, the minimum and maximum amounts of fat (6 and 50 mg) protected micro-organisms during steam sterilization at 134 °C for 1.5 and 3 min. CONCLUSION: Effective cleaning and sterilization of liposuction cannulas intentionally contaminated with human fat, MASB and G. stearothermophilus could not be performed.

The Influence of the Synthesis Method on the Characteristics of BaTiO3.

In this work, barium titanate powders were produced by sol-gel and sol-precipitation methods from metal alkoxides. In the sol-gel method, tetraisopropyl orthotitanate was mixed with 2-propanol, acetic acid and barium acetate, and the gel samples obtained were calcined at 600 °C, 800 °C and 1000 °C. Through the sol-precipitation method, tetraisopropyl orthotitanate was mixed with acetic acid and deionized water and precipitated by the addition of a concentrated solution of KOH. The products were calcined at various temperatures, and the microstructural and dielectric properties of the BaTiO3 prepared for the two processes were analyzed and compared. The results of these analyses allowed us to observe an increase in the tetragonal phase and the dielectric constant (15-50 at 20 kHz) with increasing temperatures in the samples produced by the sol-gel method, while the sample obtained by sol precipitation was cubic. The presence of BaCO3 is more evident in the sample produced by sol-precipitation, and the band gap of the products obtained did not show significant variation, changing the synthesis method (3.363-3.594 eV).

Single-Implant Overdentures Retained by a Novel Attachment: A Mixed Methods Crossover Randomized Clinical Trial.

INTRODUCTION: Single-implant mandibular overdentures (SIMOs) are one of the least invasive implant treatments for edentulism. The new Novaloc attachment system can improve the clinical performance of implant-retained overdentures but has not been tested for SIMOs. OBJECTIVES: To compare Novaloc and a gold standard system (Locator) for SIMOs in an edentate elderly population in terms of patient-reported outcomes and device- and treatment-related complications. METHODS: In this single-center crossover randomized clinical trial (RCT), 10 edentulous participants received an implant in the lower midline and had their lower complete dentures converted to SIMOs. The participants received each attachment system for 3 mo in a randomized order, followed by measurement of patient satisfaction and oral health-related quality of life via the McGill Denture Satisfaction Questionnaire and the Oral Health Impact Profile for Edentulous People questionnaire, respectively. Complications were registered throughout the RCT. Patients were interviewed for their experiences with SIMOs and preference for one of the attachment systems. Quantitative analysis employed mixed linear models and chi-square tests (α = 0.05), whereas interview data underwent thematic analysis and, in turn, integration into quantitative data (mixed methods explanatory design). RESULTS: All 10 randomized participants completed the trial. Mean ± SD general satisfaction was 92% ± 8% with Novaloc versus 85% ± 13% with Locator (mean difference, 9%; 95% CI, 1% to 17%). For specific McGill Denture Satisfaction Questionnaire items, only denture stability was significantly increased for Novaloc. Seven participants preferred Novaloc over Locator at the end of the RCT (chi-square, P = 0.045). No difference was found between the attachments in terms of oral health-related quality of life based on the Oral Health Impact Profile for Edentulous People and complications. Thematic analysis revealed high patient satisfaction with SIMOs, with denture stability the main criterion for their satisfaction and attachment preference. CONCLUSION: Among elderly edentulous patients wearing SIMOs, Novaloc led to increased patient satisfaction and preference. Better patient-perceived denture stability may explain this result. The attachment systems exhibited similar short-term maintenance needs. TRIAL REGISTRATION: ClinicalTrials.gov: NCT03126942 (first registered on April 13, 2017). Secondary identifiers: A03-M07-17A (McGill University, Institutional Review Board) and 2018-3873 (McGill University Health Centre, Research Ethics Board). KNOWLEDGE TRANSFER STATEMENT: The results of this mixed methods study can be used by clinicians when choosing which attachment system to use for SIMOs. Results suggest that edentulous patients prefer attachments with a better-defined seating position, such as that of the Novaloc system, as opposed to the nylon matrix on metallic abutment of the Locator system.

Dynamics of coreless defects during winding up transitions in confined chiral nematic liquid crystals.

Twist-coupled elastic deformations are ubiquitous and in the limelight of interest for next-generation self-shaping materials. Here, we describe how twist dynamics under fixed anchoring lead to bend deformation and defect dynamics in a field-unwound chiral liquid crystal material. We use the Q-tensor dynamics under the Landau-de Gennes formalism in a finite-element mesh to explore the texture pathways from the unwound (homeotropic) to the helical planar structure. Our simulations describe well previously reported experiments and confirm that the process occurs by forming pairs of coreless defects that interact with each other and create quadrupolar structures called Lehmann clusters. The dynamics and coarsening of dipoles and quadrupoles of defects are described. This numerical study describes the full dynamics, which has been sought for several years.

Specialists' opinion regarding factors related to wet loads after steam sterilization.

BACKGROUND: Episodes of wet loads after steam sterilization are frequent; however, the factors related to these events are still unclear. AIM: To evaluate the strength of relationship of factors related to wet loads after steam sterilization. METHODS: By adapting the Delphi technique, steam sterilization specialists assigned a score for the relation strength of a list of 37 factors (f.01-37) related to wet load, grouped into: cycle parameters, sterilizer, steam, load, and environment. Sixty-seven specialists distributed on five continents participated in all phases of this study. FINDINGS: Certain factors related to wet loads are better established, such as vacuum depth in the drying phase, whereas others are still controversial, such as those related to the environment. The factor that obtained the highest average score was the vacuum depth in the drying phase (f.12), with a value of 4.28, and the lowest score of 2.66 was obtained in the delay time when the set reaches the value of vacuum or steam in the conditioning phase (f.05). CONCLUSION: Specialists' opinions diverge in most of the factors related to the occurrence of wet loads. The results obtained will enable further research and the establishment of normative requirements.

Growth regulators and their reflection on different hop genotypes cultivated under in vitro conditions / Reguladores de crescimento e seu reflexo em diferentes genótipos de lúpulo cultivados in vitro

Hops is a new culture in Brazil. Tissue culture can be an important technique for rapid hop propagation. This paper aims to characterize responses from different genotypes under different growth regulators through the interrelationship of response variables important to hop in vitro growth. Three genotypes were cultivated in six culture media with different combinations of growth regulators, BAP (6-benzylaminopurine), IAA (3-indolacetic acid) and GA3 (gibberellic acid). The means were compared by orthogonal contrasts and the interrelationship of the response variables was performed by path analysis. American genotypes showed favorable root development under the BAP + IAA combination, while the use of IAA improved shoot development. The origin of genotypes was important for defining the best protocol for in vitro cultivation. The path coefficient showed that the variable number of shoots has stronger direct effect on the number of nodal segments. Additionally, in tissue culture assays, the use of a covariable and proper error distribution significantly increased experimental accuracy.

O lúpulo é uma nova cultura no Brasil. A cultura de tecidos pode ser uma técnica importante para a propagação rápida do lúpulo. Este artigo tem como objetivo caracterizar respostas de diferentes genótipos sob diferentes reguladores de crescimento através da inter-relação de variáveis de resposta importantes para o crescimento in vitro. Três genótipos foram cultivados em seis meios de cultura com diferentes combinações de reguladores de crescimento, BAP (6-benzilaminopurina), AIA (ácido 3-indolacético) e GA3 (ácido giberélico). As médias foram comparadas por contrastes ortogonais e a inter-relação das variáveis de resposta foi realizada por análise de trilha. Os genótipos americanos apresentaram desenvolvimento radicular favorável sob a combinação BAP + AIA, enquanto o uso do AIA melhorou o desenvolvimento da parte aérea. A origem dos genótipos foi importante para definir o melhor protocolo para o cultivo in vitro. O coeficiente de trilha mostrou que a variável número de brotos tem um efeito direto mais forte no número de segmentos nodais. Adicionalmente, em experimentos com cultura de tecidos, o uso de uma covariável e distribuição de erro adequada aumentou significativamente a precisão experimental.

Growth regulators and their reflection on different hop genotypes cultivated under in vitro conditions / Reguladores de crescimento e seu reflexo em diferentes genótipos de lúpulo cultivados in vitro

Hops is a new culture in Brazil. Tissue culture can be an important technique for rapid hop propagation. This paper aims to characterize responses from different genotypes under different growth regulators through the interrelationship of response variables important to hop in vitro growth. Three genotypes were cultivated in six culture media with different combinations of growth regulators, BAP (6-benzylaminopurine), IAA (3-indolacetic acid) and GA3 (gibberellic acid). The means were compared by orthogonal contrasts and the interrelationship of the response variables was performed by path analysis. American genotypes showed favorable root development under the BAP + IAA combination, while the use of IAA improved shoot development. The origin of genotypes was important for defining the best protocol for in vitro cultivation. The path coefficient showed that the variable number of shoots has stronger direct effect on the number of nodal segments. Additionally, in tissue culture assays, the use of a covariable and proper error distribution significantly increased experimental accuracy.

O lúpulo é uma nova cultura no Brasil. A cultura de tecidos pode ser uma técnica importante para a propagação rápida do lúpulo. Este artigo tem como objetivo caracterizar respostas de diferentes genótipos sob diferentes reguladores de crescimento através da inter-relação de variáveis de resposta importantes para o crescimento in vitro. Três genótipos foram cultivados em seis meios de cultura com diferentes combinações de reguladores de crescimento, BAP (6-benzilaminopurina), AIA (ácido 3-indolacético) e GA3 (ácido giberélico). As médias foram comparadas por contrastes ortogonais e a inter-relação das variáveis de resposta foi realizada por análise de trilha. Os genótipos americanos apresentaram desenvolvimento radicular favorável sob a combinação BAP + AIA, enquanto o uso do AIA melhorou o desenvolvimento da parte aérea. A origem dos genótipos foi importante para definir o melhor protocolo para o cultivo in vitro. O coeficiente de trilha mostrou que a variável número de brotos tem um efeito direto mais forte no número de segmentos nodais. Adicionalmente, em experimentos com cultura de tecidos, o uso de uma covariável e distribuição de erro adequada aumentou significativamente a precisão experimental.

Growth regulators and their reflection on different hop genotypes cultivated under in vitro conditions

Abstract Hops is a new culture in Brazil. Tissue culture can be an important technique for rapid hop propagation. This paper aims to characterize responses from different genotypes under different growth regulators through the interrelationship of response variables important to hop in vitro growth. Three genotypes were cultivated in six culture media with different combinations of growth regulators, BAP (6-benzylaminopurine), IAA (3-indolacetic acid) and GA3 (gibberellic acid). The means were compared by orthogonal contrasts and the interrelationship of the response variables was performed by path analysis. American genotypes showed favorable root development under the BAP + IAA combination, while the use of IAA improved shoot development. The origin of genotypes was important for defining the best protocol for in vitro cultivation. The path coefficient showed that the variable number of shoots has stronger direct effect on the number of nodal segments. Additionally, in tissue culture assays, the use of a covariable and proper error distribution significantly increased experimental accuracy.

Resumo O lúpulo é uma nova cultura no Brasil. A cultura de tecidos pode ser uma técnica importante para a propagação rápida do lúpulo. Este artigo tem como objetivo caracterizar respostas de diferentes genótipos sob diferentes reguladores de crescimento através da inter-relação de variáveis de resposta importantes para o crescimento in vitro. Três genótipos foram cultivados em seis meios de cultura com diferentes combinações de reguladores de crescimento, BAP (6-benzilaminopurina), AIA (ácido 3-indolacético) e GA3 (ácido giberélico). As médias foram comparadas por contrastes ortogonais e a inter-relação das variáveis de resposta foi realizada por análise de trilha. Os genótipos americanos apresentaram desenvolvimento radicular favorável sob a combinação BAP + AIA, enquanto o uso do AIA melhorou o desenvolvimento da parte aérea. A origem dos genótipos foi importante para definir o melhor protocolo para o cultivo in vitro. O coeficiente de trilha mostrou que a variável número de brotos tem um efeito direto mais forte no número de segmentos nodais. Adicionalmente, em experimentos com cultura de tecidos, o uso de uma covariável e distribuição de erro adequada aumentou significativamente a precisão experimental.

Influence of incubation temperature and embryonic motility on the growth of members of Caiman yacare (Daudin, 1802).

This study aimed to evaluate whether skeletal development of the Pantanal Caiman (Caiman yacare) is similarly influenced by temperature variation and controlled increases in embryo motility. All eggs were incubated at 90% humidity and 29 °C for the first 45 days. Thereafter, the incubation temperature was either maintained at 29 °C and embryos were treated with 4-aminopyridine (4-AP) on days 46, 47, 48, and 49 (Group I, 29 °C 4-AP, n = 15); maintained at 29 °C (n = 14; Group II); or at 33 °C (n = 14, Group III). Embryonic movement was measured using an Egg Buddy® digital monitor on days 30, 35, 42, 49, 56, and 60, at which point embryos were euthanized and samples were collected for analysis. No differences were observed between groups with varying incubation temperatures. In contrast, embryonic motility was greater in embryos treated with 4-AP (P < 0.001) on day 49, and this was associated with higher proportions of snout-vent and hand lengths. This study demonstrates for the first time that pharmacologically induced increases in embryo motility result in phenotypic changes to the proportion of elements during prenatal ontogeny, thereby effectively altering the adaptation of the species to specific environments.

Occurrence of Meloidogyne Arenaria in Black Pepper (Piper Nigrum L.) in the Extreme South of the State of Bahia, Brazil.

Samples of black pepper root with the presence of galls from the most southern region of the State of Bahia, Brazil, were characterized biochemically and morphologically using three criteria: i) observation of the anterior region of the males; ii) analysis of female perineal configuration and iii) polyacrylamide gel electrophoresis technique. Meloidogyne arenaria was found. This is the first report of this pathosystem in the State.

The plate-to-rod transition in trabecular bone loss is elusive.

Changes in trabecular micro-architecture are key to our understanding of osteoporosis. Previous work focusing on structure model index (SMI) measurements have concluded that disease progression entails a shift from plates to rods in trabecular bone, but SMI is heavily biased by bone volume fraction. As an alternative to SMI, we proposed the ellipsoid factor (EF) as a continuous measure of local trabecular shape between plate-like and rod-like extremes. We investigated the relationship between EF distributions, SMI and bone volume fraction of the trabecular geometry in a murine model of disuse osteoporosis as well as from human vertebrae of differing bone volume fraction. We observed a moderate shift in EF median (at later disease stages in mouse tibia) and EF mode (in the vertebral samples with low bone volume fraction) towards a more rod-like geometry, but not in EF maximum and minimum. These results support the notion that the plate to rod transition does not coincide with the onset of bone loss and is considerably more moderate, when it does occur, than SMI suggests. A variety of local shapes not straightforward to categorize as rod or plate exist in all our trabecular bone samples.

Growth regulators and their reflection on different hop genotypes cultivated under in vitro conditions.

Hops is a new culture in Brazil. Tissue culture can be an important technique for rapid hop propagation. This paper aims to characterize responses from different genotypes under different growth regulators through the interrelationship of response variables important to hop in vitro growth. Three genotypes were cultivated in six culture media with different combinations of growth regulators, BAP (6-benzylaminopurine), IAA (3-indolacetic acid) and GA3 (gibberellic acid). The means were compared by orthogonal contrasts and the interrelationship of the response variables was performed by path analysis. American genotypes showed favorable root development under the BAP + IAA combination, while the use of IAA improved shoot development. The origin of genotypes was important for defining the best protocol for in vitro cultivation. The path coefficient showed that the variable number of shoots has stronger direct effect on the number of nodal segments. Additionally, in tissue culture assays, the use of a covariable and proper error distribution significantly increased experimental accuracy.

Methodological Issues and the Impact of Age Stratification on the Proportion of Participants with Low Appendicular Lean Mass When Adjusting for Height and Fat Mass Using Linear Regression: Results from the Canadian Longitudinal Study on Aging.

BACKGROUND: Using residual values calculated from models regressing appendicular lean mass on fat mass and height is one of several suggested strategies for adjusting appendicular lean mass for body size when measuring sarcopenia. However, special consideration is required when using this technique in different subgroups in order to capture the correct individuals as sarcopenic. OBJECTIVES: To provide guidance about how to conduct stratified analyses for the regression adjustment technique using age groups as an example. DESIGN: Cross-sectional study. SETTING: Data collected at baseline (2012-2015) for the Canadian Longitudinal Study on Aging. PARTICIPANTS: Community dwelling participants of European descent aged 45 to 85 years (n=25,399). MEASUREMENTS: Appendicular lean mass, height, and weight were measured. Sex-specific residuals were calculated in participants before and after stratifying participants by age group (45-54, 55-64, 65-74, 75-85 years). Cut offs corresponding to the sex-specific 20th percentile residual values in participants ≥65 years were determined first in the residuals calculated in all participants and residuals calculated in only those aged ≥65 years. For each set of cut offs, the percentage of age and sex-stratified participants with low appendicular lean mass were compared for the residuals calculated in all participants and the residuals calculated after stratifying by age. RESULTS: In 12,622 males and 12,737 females, regardless of the cut off used, the percentage of participants with low appendicular lean mass decreased with age when residuals were calculated after age stratification. When the residuals were calculated in all participants, the percentage of participants with sarcopenia increased from the youngest to the oldest age groups. CONCLUSIONS: Sex-specific residuals in all participants should be calculated prior to stratifying the sample by age group, or other stratification variables, for the purposes of developing appendicular lean mass cut offs or subgroup analyses.

Development and characterization of a carvacrol nanoemulsion and evaluation of its antimicrobial activity against selected food-related pathogens.

Carvacrol has been recognized as an efficient growth inhibitor of food pathogens. However, carvacrol oil is poorly water-soluble and can be oxidized, decomposed or evaporated when exposed to the air, light, or heat. To overcome these limitations, a carvacrol nanoemulsion was developed and its antimicrobial activity against food pathogens evaluated in this study. The nanoemulsion containing 3% carvacrol oil, 9% surfactants (HLB 11) and 88% water, presented good stability over a period of 90 days. In general, the carvacrol nanoemulsion (MIC: 256 µg ml-1 for E. coli and Salmonella spp., 128 µg ml-1 for Staphylococcus aureus and Pseudomonas aeruginosa) exhibited improved antimicrobial activity compared to the free oil. The carvacrol nanoemulsion additionally displayed bactericidal activity against Escherichia coli, P. aeruginosa and Salmonella spp. Therefore, the results of this study indicated that carvacrol oil nanoemulsions can potentially be incorporated into food formulations, wherein their efficacy for the prevention and control of microbial growth could be evaluated.

Does conventional early life academic excellence predict later life scientific discovery? An assessment of the lives of great medical innovators.

BACKGROUND: Perhaps, as never before, we need innovators. With our growing population numbers, and with increasing pressures on our education systems, are we in danger of becoming more rigid and formulaic and increasingly inhibiting innovation? When young can we predict who will become the great innovators? For example, in medicine, who will change clinical practice? AIMS: We therefore determined to assess whether the current academic excellence approach to medical school entrance would have captured previous great innovators in medicine, assuming that they should all have well fulfilled current entrance requirements. METHODS: The authors assembled a list of 100 great medical innovators which was then approved, rejected or added to by a jury of 12 MD fellows of the Royal Society of Canada. Two reviewers, who had taken both the past and present Medical College Admission Test as part of North American medical school entrance requirements, independently assessed each innovator's early life educational history in order to predict the innovator's likely success at medical school entry, assuming excellence in all entrance requirements. RESULTS: Thirty-one percent of the great medical innovators possessed no medical degree and 24% would likely be denied entry to medical school by today's standards (e.g. had a history of poor performance, failure, dropout or expulsion) with only 24% being guaranteed entry. Even if excellence in only one topic was required, the figure would only rise to 41% certain of medical school entry. CONCLUSION: These data show that today's medical school entry standards would have barred many great innovators and raise questions about whether we are losing medical innovators as a consequence. Our findings have important implications for promoting flexibility and innovation for medical education, and for promoting an environment for innovation in general.